DELL 8132 ユーザーズマニュアル

ページ / 1818
IPv6 Routing Commands
1125
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following parameters are displayed by this command:
Example
console#show ipv6 mld-proxy groups
Interface................................ vlan 10
Group Address Last Reporter  Up Time    Member State      Filter Mode  Sources
------------- -------------- ---------- ----------------- ------------ -----
--
FF1E::1       FE80::100:2.3  00:01:40   DELAY_MEMBER      Exclude        2
FF1E::2       FE80::100:2.3  00:02:40   DELAY_MEMBER      Include        1
FF1E::3       FE80::100:2.3  00:01:40   DELAY_MEMBER      Exclude        0
FF1E::4       FE80::100:2.3  00:02:44   DELAY_MEMBER      Include        4
Field
Description
Interface
The MLD Proxy interface.
Group Address The IP address of the multicast group.
Last Reporter
The IP address of the host that last sent a membership report for the 
current group on the network attached to the MLD-Proxy interface 
(upstream interface).
Up Time (in 
secs)
The time elapsed in seconds since last created.
Member State Possible values are:
• Idle_Member—The interface has responded to the latest group 
membership query for this group.
• Delay_Member—The interface is going to send a group 
membership report to respond to a group membership query for 
this group.
Filter Mode
Possible values are Include or Exclude.
Sources
The number of sources attached to the multicast group.
2CSPC4.X8100-SWUM102.book  Page 1125  Friday, March 15, 2013  8:56 AM