DELL 8132 ユーザーズマニュアル
1172
Multicast Commands
No RP-Group mappings exist/learned on this router.ny
interface.
show ip pim rp mapping
The show ip pim rp mapping command is used in User EXEC and Privileged
EXEC modes to display the mappings for the PIM group to the active
rendezvous points. This command deprecates the show ip pimsm rp
candidate, show ip pimsm staticrp, show ip pimsm rp mapping commands.
Syntax
show ip pim rp mapping [
rp-address |candidate|static]
rp-address — An RP address.
Default configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Field Descriptions
Example
console#show ip pim rp mapping candidate
RP Address.................................... 192.168.10.1
Field
Description
RP Address
Address of the RP
Group Address
Address of the multicast group.
Group Mask
Mask for the group address.
Origin
Origin from where this group mapping is learned.
2CSPC4.X8100-SWUM102.book Page 1172 Friday, March 15, 2013 8:56 AM