DELL 8132 ユーザーズマニュアル
1180
IPv6 Multicast Commands
ipv6 pim hello-interval
Use the ipv6 pim hello-interval command to configure the PIM-SM Hello
Interval for the specified interface. Use the "no" form of this command to set
the hello interval to the default.
Syntax
ipv6 pim hello-interval interval
no ipv6 pim hello-interval
no ipv6 pim hello-interval
• interval—The hello interval (Range: 0–65535 seconds).
Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pim hello-interval 45
ipv6 pim join-prune-interval
Use the ipv6 pim join-prune-interval command to configure the interface
join/prune interval for the PIM-SM router. Use the "no" form of this
command to set the join/prune interval to the default.
Syntax
ipv6 pim join-prune-interval interval
no ipv6 pim join-prune-interval
no ipv6 pim join-prune-interval
• interval—The join/prune interval (Range: 0–18000 seconds).
2CSPC4.X8100-SWUM102.book Page 1180 Friday, March 15, 2013 8:56 AM