DELL 8132 ユーザーズマニュアル
1240
OSPF Commands
Command Mode
OSPFv2 Router Configuration mode
User Guidelines
State changes are logged with INFORMATIONAL severity.
max-metric router-lsa
Use the max-metric router-lsa command in router OSPF Global
Configuration mode to configure OSPF to enable stub router mode.
To disable stub router mode, use the no max-metric router-lsa command in
To disable stub router mode, use the no max-metric router-lsa command in
OSPFv2 Global Router Configuration mode.
Syntax
max-metric router-lsa [on-startup
seconds] [summary-lsa {metric}]
no max-metric router-lsa [on-startup] [summary-lsa]
Parameter Description
Default Configuration
By default, OSPF is not in stub router mode.
Command Mode
OSPFv2 Global Configuration mode
Parameter
Description
on-startup
(Optional) OSPF starts in stub router mode after a reboot.
seconds
(Required if on-startup) The number of seconds that OSPF
remains in stub router mode after a reboot. The range is 5 to
86,400 seconds. There is no default value.
summary-lsa
(Optional) Set the metric in type 3 and 4 summary LSAs to
LsInfinity (0xFFFFFF).
metric
(Optional) Metric to send in summary LSAs when in stub
router mode. Range is 1 to 16,777,215. Default is 16,711,680
(0xFF0000).
2CSPC4.X8100-SWUM102.book Page 1240 Friday, March 15, 2013 8:56 AM