DELL 8132 ユーザーズマニュアル

OSPF Commands

Total.......................................... 0

Use the show ip ospf interface command in Privileged EXEC mode to display 

the information for the VLAN or loopback interface. The long form of the 

command displays the configuration of flood blocking.

show ip ospf interface [interface-type interface-number]

This command has no default configuration.

User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes

This command has no user guidelines.

The following example displays the information for the IFO object or virtual 

interface tables associated with VLAN 3.

console#show ip ospf interface vlan 10

IP Address..................................... 1.1.1.1

Subnet Mask................................. 255.255.255.0

Secondary IP Address(es).......................

interface-type

Vlan or loopback

interface-number

Valid VLAN ID or loopback interface number (Range: 0–7).

Flood Blocking

Indicates if flood blocking is enabled or disabled.

2CSPC4.X8100-SWUM102.book  Page 1268  Friday, March 15, 2013  8:56 AM