DELL 8132 ユーザーズマニュアル

OSPF Commands

OSPF Interface Events.................................... 1

Virtual Events........................................... 0

Neighbor Events.......................................... 0

External LSA Count....................................... 0

Use the show ip ospf neighbor command in Privileged EXEC mode to display 

information about OSPF neighbors. The information below only displays if 

OSPF is enabled and the interface has a neighbor.

show ip ospf neighbor [interface-type interface-number] [neighbor-id]

This command has no default configuration.

User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes

This command has no user guidelines.

The following examples display information about OSPF neighbors on the 

specified Ethernet and IP interfaces.

console#show ip ospf neighbor 3.3.3.3

interface-type

Interface type – only supported type is vlan.

interface-number

A valid interface number.

neighbor-id

Valid IP address of the neighbor.

2CSPC4.X8100-SWUM102.book  Page 1272  Friday, March 15, 2013  8:56 AM