DELL 8132 ユーザーズマニュアル
OSPFv3 Commands
1307
Syntax
exit-overflow-interval
seconds
no exit-overflow-interval
•
seconds — Exit overflow interval for OSPF (Range: 0-2147483647)
Default Configuration
0 is the default value for
seconds.
Command Mode
Router OSPFv3 Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the exit overflow interval for OSPF at 100
seconds.
console(config)#ipv6 router ospf
console(config-rtr)#exit-overflow-interval 100
external-lsdb-limit
Use the external-lsdb-limit command in Router OSPFv3 Configuration
mode to configure the external LSDB limit for OSPF. If the value is -1, then
there is no limit. When the number of non-default AS-external-LSAs in a
router's link-state database reaches the external LSDB limit, the router enters
overflow state. The router never holds more than the external LSDB limit
non-default AS-external- LSAs in it database. The external LSDB limit
MUST be set identically in all routers attached to the OSPF backbone and/or
any regular OSPF area.
Syntax
external-lsdb-limit
limit
no external-lsdb-limit
2CSPC4.X8100-SWUM102.book Page 1307 Friday, March 15, 2013 8:56 AM