DELL 8132 ユーザーズマニュアル
Command Groups
132
IPv6 Multicast
Displays PIM interface status parameters. If no
interface is specified, the command displays the
status parameters of all PIM-enabled interfaces.
UE or
PE
Displays PIM neighbors discovered by PIMv2
Hello messages. If no interface is specified, the
command displays the neighbors discovered on
all PIM-enabled interfaces.
UE or
PE
Displays the rendezvous point (RP) selected for
the specified group address.
UE or
PE
Displays the mappings for the PIM group to the
active rendezvous points (RPs).
UE or
PE
a. For the meaning of each Mode abbreviation, see
Command
Description
Mode
a
Administratively enables PIMSM for IPv6
multicast routing
GC
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
IC
Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
IC
Configures the router to announce its
candidacy as a bootstrap router (BSR).
GC
Administratively configures PIM dense mode
for IPv6 multicast routing.
GC
Sets the priority value for which a router is
elected as the designated router (DR).
IC
Administratively configures the PIM-SM Hello
Interval for the specified interface.
IC
Administratively configures the interface
join/prune interval for the PIM-SM router.
IC
Command
Description
Mode
a
2CSPC4.X8100-SWUM102.book Page 132 Friday, March 15, 2013 8:56 AM