DELL 8132 ユーザーズマニュアル

OSPFv3 Commands

This command has no default configuration. 

User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes

This command has no user guidelines.

The following examples display information about OSPF neighbors, in the 

first case in a summary table, and in the second in a table specific to tunnel 1. 

console#show ipv6 ospf neighbor

Router ID Priority Intf Interface

State

Dead

ID

Time

--------- -------- ---- -----------

------------- ----

console#show ipv6 ospf neighbor interface tunnel 1

IP Address..................................... Err

ifIndex........................................ 619

OSPF Admin Mode................................ Enable

OSPF Area ID................................... 0.0.0.0

Router Priority................................ 1

Retransmit Interval............................ 5

Hello Interval................................. 10

interface-type

Interface type, vlan or tunnel.

interface-number

A valid interface number, a valid VLAN ID or tunnel identifier. 

(Range is 0-7).

neighbor-id

Valid IP address of the neighbor about which information is 

displayed.

2CSPC4.X8100-SWUM102.book  Page 1341  Friday, March 15, 2013  8:56 AM