DELL 8132 ユーザーズマニュアル

Virtual Router Redundancy Protocol Commands

•

level — Priority value for the interface. (Range: 1-254)

Priority has a default value of 100.

Interface Configuration (VLAN) mode.

The VRRP router with the highest numerical value for priority will become 

the VR master. When the VRRP priorities are equal, the router with the 

numerically highest IP address will win the election and become master. If the 

VRRP router is the owner of the VR IP address, its priority will be 255, and 

this value cannot be changed.

The following example sets the priority value for the virtual router 5 on VLAN 

15.

console(config-if-vlan15)#vrrp 5 priority 20

Use the vrrp timers advertise command in Interface Configuration mode to 

set the frequency, in seconds, that an interface on the specified virtual router 

sends a virtual router advertisement. Use the no form of the command to 

return the advertisement frequency to the default value.

group timers advertise interval

group timers advertise interval

•

group — The virtual router identifier. (Range: 1-255)

•

interval — The frequency at which an interface on the specified virtual 

router sends a virtual router advertisement. (Range: 1-255 seconds)

2CSPC4.X8100-SWUM102.book  Page 1389  Friday, March 15, 2013  8:56 AM