DELL 8132 ユーザーズマニュアル
Command Groups
146
Utility Commands
Auto-Install
Captive Portal
Command
Description
Mode
a
a. For the meaning of each Mode abbreviation, see
Enables or disables Stack Firmware
Synchronization.
GC
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
Enables/disables automatically saving the
downloaded configuration on the switch.
GC
Enables/disables Auto Config on the switch.
GC
Set the number of attempts to download a
configuration.
GC
Displays Stack Firmware Synchronization
configuration status.
PE
Displays the current status of the Auto Config
process.
PE
Command
Description
Mode
a
Configures the authentication timeout.
CP
Enables the captive portal configuration mode. GC
Globally enables captive portal.
CPI
Configures an additional HTTP port for captive
portal to monitor.
CP
2CSPC4.X8100-SWUM102.book Page 146 Friday, March 15, 2013 8:56 AM