DELL 8132 ユーザーズマニュアル

Management ACL Commands

The following example configures an access-list called 

mlist as the 

management access-list.

console(config)# management access-class mlist

Use the management access-list command in Global Configuration mode to 

define an access list for management, and enter the access-list for 

configuration. Once in the access-list configuration mode, the denied or 

permitted access conditions are configured with the deny and permit 

commands. To remove an access list, use the no form of this command. 

management access-list 

name

no management access-list 

name

•

name — The access list name. (Range: 1–32 printable characters)

This command has no default configuration.

Global Configuration mode

This command enters the access-list configuration mode, where the denied or 

permitted access conditions with the deny and permit commands must be 

defined.
If no match criteria are defined the default is deny.
If reentering to an access-list context, the new rules are entered at the end of 

the access-list.
Use the management access-class command to select the active access-list.
The active management list cannot be updated or removed.

2CSPC4.X8100-SWUM102.book  Page 1526  Friday, March 15, 2013  8:56 AM