DELL 8132 ユーザーズマニュアル

Serviceability Tracing Packet Commands

Use the debug lacp command to enable tracing of LACP packets received and 

transmitted by the switch. Use the “no” form of this command to disable 

tracing of LACP packets.

Display of LACP traces is disabled by default.

Privileged EXEC mode.

There are no usage guidelines for this command.

console#debug lacp packet

Use the debug mldsnooping command to trace MLD snooping packet 

reception and transmission. The receive option traces only received MLD 

snooping packets and the transmit option traces only transmitted MLD 

snooping packets. When neither keyword is used in the command, then all 

MLD snooping packet traces are dumped. Vital information such as source 

address, destination address, control packet type, packet length, and the 

interface on which the packet is received or transmitted is displayed on the 

console. Use the “no” form of this command to disable tracing of MLD 

Snooping packets.

debug mldsnooping packet [ receive | transmit ]

2CSPC4.X8100-SWUM102.book  Page 1598  Friday, March 15, 2013  8:56 AM