DELL 8132 ユーザーズマニュアル

Syslog Commands

The PowerConnect supports a centralized logging subsystem with support for 

local in memory logs, crash dump logs, and forwarding messages to syslog 

servers. All switch components use the logging subsystem. Components log 

messages to the logging component using one of the following severity levels:

• Emergency (0): system is unusable
• Alert (1): action must be taken immediately
• Critical (2): critical conditions
• Error (3): error conditions
• Warning (4): warning conditions
• Notice(5): normal but significant conditions
• Informational(6): informational messages
• Debug(7): debug-level messages

The PowerConnect Command Logging component logs all command line 

interface commands issued on the system. The command log messages are 

stored with the other system logs and provide the system operators with a 

detailed log of the commands executed.
CLI command logging is configured through any of the PowerConnect 

management interfaces. When the feature is enabled, all CLI commands are 

logged using the existing logging subsystems. By default, the feature is 

disabled.
The CLI command logging severity is set to SEVERITY_NOTICE. The 

logging severity is not modifiable by the administrator.
For example, the CLI log message for the user admin is: 

<189> JAN 10 18:59:09 10.27.21.22-2 

CMDLOGGER[209809328]: cmd_logger_api.c(83) 367 %% 

CLI:EIA-232:----:configure

2CSPC4.X8100-SWUM102.book  Page 1659  Friday, March 15, 2013  8:56 AM