DELL 8132 ユーザーズマニュアル

ページ / 1818
System Management Commands
1685
The motd banner is usually displayed prior to logging into the switch, 
although some protocols, for example SSH, may enforce different behavior. 
See the user guidelines for 
 for some examples.
Example
console(config)# banner motd “IMPORTANT: There is a 
power shutdown at 23:00hrs today, duration 1 hr 30 
minutes.”
When the MOTD banner is executed, the following displays:
IMPORTANT: There is a power shutdown at 23:00hrs today, duration 1 hr 30 
minutes.
banner motd acknowledge
The banner displayed on the console must be acknowledged if banner motd 
acknowledge is executed. Enter "y" or "n" to continue to the login prompt.  If 
"n" is entered, the session is terminated and no further communication is 
allowed on that session. However, serial connection will not get terminated if 
‘y’ is not entered. Use the no banner motd acknowledge command to disable 
banner acknowledge.
Syntax
banner motd acknowledge
no banner motd acknowledge
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Various terminal emulators exhibit different behaviors with regards to the 
MOTD and the acknowledge prompt, for example, TeraTerm and putty. 
There are also different behaviors based upon the protocol used (SSH versus 
2CSPC4.X8100-SWUM102.book  Page 1685  Friday, March 15, 2013  8:56 AM