DELL 8132 ユーザーズマニュアル

System Management Commands

1691

Syntax

hardware profile portmode {1x40g|4x10g}
no hardware profile portmode

Parameter Description

Default Configuration

By default, 40G ports are configured in 1x40G mode.

Command Mode

Interface Config mode

User Guidelines

This command can only be executed on the 40G interface. Entering this

command on any of the 4x10G interfaces (or any other 10G port) will give an

error.
This command takes effect only after rebooting the switch.

hostname

Use the hostname command in Global Configuration mode to specify or

modify the switch host name. To restore the default host name, use the no

form of the command.

Syntax

hostname

name

no hostname

Parameter

Description

1x40g

Configure the port as a single 40G port using 4 lanes.

4x10g

Configure the port as four 10G ports, each on a separate lane.

This mode requires the use of a suitable 4x10G to 1x40g pigtail

cable.

2CSPC4.X8100-SWUM102.book Page 1691 Friday, March 15, 2013 8:56 AM