DELL 8132 ユーザーズマニュアル

System Management Commands

The following example displays

console(config)#stack

console(config-stack)#set description 1 “unit 1"

Use the slot command to configure a slot in the system. The unit/slot is the 

slot identifier of the slot located in the specified unit. The 

cardindex is the 

index to the database of the supported card types (see the command 

) indicating the type of card being preconfigured in the 

specified slot. The card index is a 32-bit integer. If a card is currently present 

in the slot that is unconfigured, the configured information will be deleted 

and the slot will be reconfigured with default information for the card. The 

supported card types are: 

• PowerConnect 7024
• PowerConnect 7024P
• PowerConnect 7024F
• PowerConnect 7048
• PowerConnect 7048P
• PowerConnect 7048R
• PowerConnect 7048R-RA
• CX4  Expansion  Card
• 10GBaseT Expansion Card
• SFP+  Expansion  Card

Use the no form of the command to return the unit/slot configuration to the 

default value.

unit/slot cardindex

no slot 

unit/slot

•

unit/slot — The slot identifier of the slot.

2CSPC4.X8100-SWUM102.book  Page 1702  Friday, March 15, 2013  8:56 AM