DELL 8132 ユーザーズマニュアル
![DELL](https://files.manualsbrain.com/attachments/2e2ed634a275b6b98ad69257c58632e179ac1658/common/fit/150/50/0b94a25108df4a3b962d3b8aa65fc4eda1ead8e68832a26b3f5ed6aa6a0b/brand_logo.png)
Using the CLI
190
Starting the CLI
To begin running the CLI, perform the following steps:
NOTE:
This procedure is for use on the console line only.
NOTE:
The Easy Setup Wizard is available only when the system is in default state
with no user configuration saved previously.
1 Start the switch and wait until the startup procedure is complete and the
User EXEC mode is entered. The prompt
console> is displayed.
VLAN
From Global
Configuration
mode, use the
interface vlan
command.
console(config-if-vlan
vlan-
id
)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Tunnel
From Global
Configuration
mode, use the
interface tunnel
command. Or, use
the abbreviation
interface tu.
console(config-tunnel
tunnel-
id
)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Loopback From
Global
configuration mode,
use the interface
loopback
command. Or, use
the abbreviation
interface lo.
console(config-
loopback
loopback
loopback-id
)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Table 2-5. Navigating CLI Command Modes
(continued)
Command Mode Access Method
Command Prompt
Exit or Access
Previous Mode
Previous Mode
2CSPC4.X8100-SWUM102.book Page 190 Friday, March 15, 2013 8:56 AM