DELL 8132 ユーザーズマニュアル
Address Table Commands
317
show ports security addresses
Use the show ports security addresses command in Privileged EXEC mode to
display current dynamic addresses in locked ports.
Syntax
show ports security addresses {gigabitethernet
unit/slot/port | port-channel
port-channel-number | tengigabitethernet
unit/slot/port |
fortygigabitethernet
unit/slot/port}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following example displays dynamic addresses for port channel number
1/0/1.
console#show ports security addresses Te1/0/1
Dynamic addresses: 83
Maximum
The maximum addresses that can be associated
on this port in Static Learning mode or in
Dynamic Learning mode.
Trap
Indicates if traps would be sent in case of
violation.
Frequency
The minimum time between consecutive traps.
Field
Description
2CSPC4.X8100-SWUM102.book Page 317 Friday, March 15, 2013 8:56 AM