DELL 8132 ユーザーズマニュアル

334

CDP Interoperability Commands

Syntax

show isdp neighbors {[gigabitethernet

unit/slot/port | tengigabitethernet

unit/slot/port | fortygigabitethernet | detail]}

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode, Config mode and all Config sub-modes

User Guidelines

The information displayed varies based upon the information received from

the ISDP neighbor.

Example

console#show isdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source

Route, S - Switch, H - Host, I - IGMP, r - Repeater

Device ID Intf Hold Cap. Platform

Port ID

---------

---- ----- ---- --------

-------

Switch

1/0/1 165 RI cisco WS-C4948 GigabitEthernet1/1

console#show isdp neighbors detail

Device ID Switch

Address(es):

IP Address: 172.20.1.18

Capability Router IGMP

Platform cisco WS-C4948

2CSPC4.X8100-SWUM102.book Page 334 Friday, March 15, 2013 8:56 AM