DELL 8132 ユーザーズマニュアル

DHCP Management Interface Commands

Use the release dhcp command in Privileged EXEC mode to force the 

DHCPv4 client to release a leased address.

interface-id

This command has no default configuration.

Privileged EXEC

The DHCP client sends a DHCP RELEASE message telling the DHCP 

server that it no longer needs the IP address, and that the IP address can be 

reassigned to another client. The interface method does not change and will 

still be DHCP even after issuing this command. To lease an IP address again, 

issue either the renew dhcp 

interface-id command below or 

 command on page 494 in interface mode. If the IPv4 

address on the interface was not assigned by DHCP, then the command fails 

and displays the following error message:

Interface does not have a DHCP-originated address.

The release dhcp option is applicable only for routing interfaces and not for 

Out-of-Band port. Use the 

 command on the 

Out-of-Band interface to clear a DHCP-acquired address.

interface-id

Any valid VLAN interface. See 

for interface representation.

2CSPC4.X8100-SWUM102.book  Page 352  Friday, March 15, 2013  8:56 AM