DELL 8132 ユーザーズマニュアル
DHCP Management Interface Commands
355
console#debug dhcp packet transmit
The third example is for receive flow.
console#debug dhcp packet receive
show dhcp lease
Use the show dhcp lease command in Privileged EXEC mode to display IPv4
addresses leased from a DHCP server.
Syntax
show dhcp lease [interface
interface-id]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command lists all IPv4 addresses currently leased from a DHCP server
on a routing interface. This command only applies to routing interfaces. To
see the IPv4 address leased on the out-of-band interface, use the command
out-of-band.
This command output provides the following information.
Parameter
Description
interface-id
for interface representation.
Term
Description
IP address, Subnet
mask
The IP address and network mask leased from the DHCP server.
2CSPC4.X8100-SWUM102.book Page 355 Friday, March 15, 2013 8:56 AM