DELL 8132 ユーザーズマニュアル
484
IGMP Snooping Querier Commands
console(config)#ip igmp snooping querier election participate
ip igmp snooping querier query-interval
This command sets the IGMP Querier Query Interval time, which is the
amount of time in seconds that the switch waits before sending another
periodic query. The no form of this command sets the IGMP Querier Query
Interval time to its default value.
Syntax
ip igmp snooping querier query-interval
interval-count
no ip igmp snooping querier query-interval
•
interval–count — Amount of time in seconds that the switch waits before
sending another general query. (Range: 1-1800)
Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
The value of this parameter should be larger than the IGMP Snooping Max
Response Time.
Example
The following example sets the query interval to 1800:
console(config)#ip igmp snooping querier query_interval 1800
ip igmp snooping querier timer expiry
This command sets the IGMP Querier timer expiration period which is the
time period that the switch remains in Non-Querier mode after it has
discovered that there is a Multicast Querier in the network. The no form of
this command sets the IGMP Querier timer expiration period to its default
value.
2CSPC4.X8100-SWUM102.book Page 484 Friday, March 15, 2013 8:56 AM