DELL 8132 ユーザーズマニュアル

IP Addressing Commands

•

server-address—Valid IPv4 or IPv6 addresses of the name server. (Range: 

1–255 characters)

No name server IP addresses are specified.

Global Configuration mode

Server preference is determined by entry order. 
Up to eight servers can be defined in one command or by using multiple 

commands. Use the 

 command on page 505 to display the 

configured name servers.

The following example sets the available name server.

console(config)#ip name-server 176.16.1.18

Use the ipv6 address command to set the IPv6 address of the management 

interface. Use the no form of this command to reset the IPv6 address to the 

default.

ipv6 address {

prefix/prefix-length [eui64] | autoconfig | dhcp}

•

prefix—Consists of the bits of the address to be configured.

•

prefix-length—Designates how many of the high-order contiguous bits of 

the address make up the prefix.

•

eui64—The optional eui-64 field designates that IPv6 processing on the 

interfaces is enabled using an EUI-64 interface ID in the low order 64 bits 

of the address. If this option is used, the value of prefix_length must be 64 

bits.

2CSPC4.X8100-SWUM102.book  Page 499  Friday, March 15, 2013  8:56 AM