DELL 8132 ユーザーズマニュアル

ページ / 1818
IPv6 MLD Snooping Commands
523
You should enable immediate-leave admin mode only on VLANs where only 
one host is connected to each layer 2 LAN port. This prevents the inadvertent 
dropping of the other hosts that were connected to the same layer 2 LAN 
port, but were still interested in receiving multicast traffic directed to that 
group. Also, immediate-leave processing is supported only with MLD version 
1 hosts.
Syntax
ipv6 mld snooping vlan 
vlan-id immediate-leave
vlan-id— Specifies the VLAN. 
Default Configuration 
Immediate leave is disabled on all VLANs by default.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command. 
Example
This example enables mld snooping immediate-leave for VLAN 2. 
console(config)#ipv6 mld snooping vlan 2 immediate-
leave
ipv6 mld snooping listener-message-suppression
This command enables MLD listener message suppression on a specific 
VLAN. Use the no form of this command to disable listener message 
suppression.
Syntax
ipv6 mld snooping vlan 
vlan-id listener-message-suppression
no ipv6 mld snooping vlan vlan-id listener-message-suppression
• vlan_id — Specifies a VLAN ID value. 
2CSPC4.X8100-SWUM102.book  Page 523  Friday, March 15, 2013  8:56 AM