DELL 8132 ユーザーズマニュアル

Port Channel Commands

• active — Forces the port to join a channel with LACP (dynamic LAG).

This command has no default configuration.

Interface Configuration (Ethernet) mode

This command has no user guidelines.

The following example shows how port 1/0/5 is configured to port-channel 1 

without LACP (static LAG).

console(config)# interface gigabitethernet 1/0/5

console(config-if-1/0/5)# channel-group 1 mode on

The following example shows how port 1/0/6 is 

configured to port-channel 1 with LACP (dynamic LAG).

console(config)# interface gigabitethernet 1/0/6

console(config-if-1/0/6)# channel-group 1 mode active

Use the interface port-channel command in Global Configuration mode to 

configure a port-channel type and enter port-channel configuration mode.

port-channel-number

This command has no default configuration.

2CSPC4.X8100-SWUM102.book  Page 616  Friday, March 15, 2013  8:56 AM