DELL 8132 ユーザーズマニュアル

Port Channel Commands

Use the lacp system-priority command in Global Configuration mode to 

configure the Link Aggregation system priority. To reset to default, use the no 

form of this command.

lacp system-priority 

value

•

value — Port priority value. (Range: 1–65535)

The default system priority value is 1.

Global Configuration mode

This command has no user guidelines.

The following example configures the system priority to 120.

console(config)#lacp system-priority 120

Use the lacp timeout command in Interface Configuration mode to assign an 

administrative LACP timeout. To reset the default administrative LACP 

timeout, use the no form of this command.

lacp timeout {long | short}
no lacp timeout

• long — Specifies a long timeout value.

2CSPC4.X8100-SWUM102.book  Page 620  Friday, March 15, 2013  8:56 AM