DELL 8132 ユーザーズマニュアル

QoS Commands

console(config)#policy-map color in

console(config-policy-map)#class class-ipv4

console(config-policy-classmap)#police-simple 1000 16 

conform-action transmit violate-action transmit

console(config-policy-classmap)#conform-color class-

cos1

console(config-policy-classmap)#exit

console(config-policy-map)#exit

console(config)#

Use the cos-queue min-bandwidth command in either Global Configuration 

mode or Interface Configuration mode to specify the minimum transmission 

bandwidth for each interface queue. To restore the default for each queue’s 

minimum bandwidth value, use the no form of this command.

cos-queue min-bandwidth 

bw-0 bw-1 … bw-n

•

bw-0 — Specifies the minimum transmission bandwidth guarantee for an 

interface. You must specify as many bandwidth parameters as there are 

COS queues (bw-0 through bw-n). (Range: 0–100 in increments of 5)

By default, all CoS queues are configured with a 0% minimum bandwidth 

guarantee.

Global Configuration mode or Interface Configuration (gigabitethernet, 

port-channel, tengigabitethernet

, fortygigabitethernet) mode

2CSPC4.X8100-SWUM102.book  Page 649  Friday, March 15, 2013  8:56 AM