DELL 8132 ユーザーズマニュアル

QoS Commands

–

transmit— Transmit the packet unmodified.

This command has no default configuration.

Policy-Class-Map Configuration mode

The CIR and PIR are measured in Kbps (not pps as indicated in the RFC), 

the CBS in Kbytes, and the PBS in Kbytes. It is recommended that the CBS 

and PBS be configured to be larger than the largest expected IP packet. A 

class command in policy-map mode must be issued for an existing class-map 

before entering this command.

console#police-two-rate 100000000 64 1000000000 32 

conform-action set-cos-transmit 7 exceed-action set-

prec-transmit 7 violate-action drop

Use the policy-map command in Global Configuration mode to establish a 

new DiffServ policy or to enter policy map configuration mode. To remove 

the policy, use the no form of this command.

policy-map 

policyname [in|out]

no policy-map 

policyname

policyname

 Specifies the DiffServ policy name as a unique case-sensitive 

alphanumeric string of characters. (Range: 1–31 alphanumeric 

characters.)

2CSPC4.X8100-SWUM102.book  Page 674  Friday, March 15, 2013  8:56 AM