DELL 8132 ユーザーズマニュアル
728
RADIUS Commands
timeout
Use the timeout command in Radius mode to set the timeout value in
seconds for the designated Radius server.
Syntax
timeout
timeout
•
timeout — Timeout value in seconds for the specified server. (Range: 1-30
seconds.)
Default Configuration
The default value is 3 seconds.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example specifies the timeout setting for the designated
Radius Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20
usage
Use the usage command in Radius mode to specify the usage type of the
server.
Syntax
usage
type
•
type — Variable can be one of the following values: login, 802.1x or all.
2CSPC4.X8100-SWUM102.book Page 728 Friday, March 15, 2013 8:56 AM