DELL 8132 ユーザーズマニュアル

Spanning Tree Commands

There are no user guidelines for this command.

The following example configures spanning-tree tcnguard on 4/0/1.

console(config-if-4/0/1)#spanning-tree tcnguard

Use the spanning-tree transmit hold-count command to set the maximum 

number of BPDUs that a bridge is allowed to send within a hello time window 

(2 seconds). Use the no form of this command to reset the hold count to the 

default value.

spanning-tree transmit [hold-count] [

value]

•

value — The maximum number of BPDUs to send (Range: 1–10).

The default hold count is 6 BPDUs.

Global Configuration mode

There are no user guidelines for this command.

The following example sets the maximum number of BPDUs 

sent to 6.

console(config)#spanning-tree transmit hold-count 6

2CSPC4.X8100-SWUM102.book  Page 761  Friday, March 15, 2013  8:56 AM