DELL 8132 ユーザーズマニュアル
VLAN Commands
797
Example
The following example displays detailed information for port 1/0/1.
console#show dvlan-tunnel interface 1/0/1
Interface
Mode
EtherType
---------
------- --------------
1/0/1
Enable
vMAN
The following table describes the significant fields shown in the example.
show interfaces switchport
Use the show interfaces switchport command in Privileged EXEC mode to
display switchport configuration, including the private VLAN mappings.
Syntax
show interfaces switchport {{gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port|
fortygigabitethernet unit/slot/port}}
Parameter Description
The command displays the following information.
Field
Description
Mode
This field specifies the administrative mode through which
Double VLAN Tunneling can be enabled or disabled. The default
value for this field is
disabled
.
Interface
Interface Number.
EtherType
This field represents a 2-byte hex EtherType to be used as the first
16 bits of the DVLAN tunnel. The three different EtherType tags
are: (1) 802.1Q, which represents the commonly used value of
0x8100. (2) vMAN, which represents the commonly used value of
0x88A8. (3) If EtherType is not one of these two values, it is a
custom tunnel value, representing any value in the range of 0 to
65535.
2CSPC4.X8100-SWUM102.book Page 797 Friday, March 15, 2013 8:56 AM