DELL 8132 ユーザーズマニュアル

VLAN Commands

Use the vlan protocol group add protocol command in Global Configuration 

mode to add a protocol to the protocol-based VLAN groups identified by 

groupid. A group may have more than one protocol associated with it. Each 

interface and protocol combination can be associated with one group only. If 

adding a protocol to a group causes any conflicts with interfaces currently 

associated with the group, this command fails and the protocol is not added 

to the group.
To remove the protocol from the protocol-based VLAN group identified by 

groupid, use the no form of this command.

groupid ethertype value

no vlan protocol group add protocol 

groupid ethertype value

•

groupid — The protocol-based VLAN group ID, which is automatically 

generated when you create a protocol-based VLAN group with the 

protocol group command. To see the group ID associated with the name 

of a protocol group, use the 

show port protocol all command.

•

ethertype 

value — The protocol you want to add. The ethertype value can 

be any valid hexadecimal number in the range 0x0600 to 0xffff.

This command has no default configuration.

Global Configuration mode

This command has no user guidelines.

The following example displays how to add the "ip" protocol to the protocol 

based VLAN group identified as "2."

console(config)#vlan protocol group add protocol 2 ethertype 0xXXXX

2CSPC4.X8100-SWUM102.book  Page 820  Friday, March 15, 2013  8:56 AM