DELL 8132 ユーザーズマニュアル

ページ / 1818
Data Center Bridging Commands
895
Example
The following example demonstrates how to set TCGs 1 and 2 to strict 
priority scheduling. 
console(config)# traffic-class-group strict 1 2
traffic-class-group weight
Use the traffic-class-group weight command in Global Config or Interface 
Config mode to specify the scheduling weight for each TCG. The scheduler 
attempts to balance the traffic selected for transmission from the TCGs such 
that, when the switch is congested, traffic is selected from the round robin 
configured TCGs in proportion to their weights.
Use the no form of the command to return the TCGs to the default weighted 
scheduler mode.
Syntax
traffic-class-group weight <wp-0> <wp-1> <wp-2>
no traffic-class-group strict
Parameter Description
Default Configuration
The default weight is in the ratio of 1:2:3 for 
TCG0:TCG1:TCG2(100%:0%:0%).
Command Mode
Global Config mode, Interface Config mode
Parameter
Description
wp-n
The weight percentage. Range 0 to 100.
2CSPC4.X8100-SWUM102.book  Page 895  Friday, March 15, 2013  8:56 AM