DELL 8132 ユーザーズマニュアル

FIP Snooping Commands

This command has no default configuration.

User EXEC, Privileged EXEC, Config mode and all Config sub-modes

This command can only be entered after FIP snooping is enabled using the 

 command. Otherwise, it does not appear in the CLI 

syntax tree.
The following information is displayed:

The command output format is different when the detail option is used. The 

information below is displayed.

FC-ID

Fiber Channel ID of the virtual port that was created by the 

FCF when the ENode VN_Port did a FLOGI/NPIV/FDISC 

request.

FCF-MAC

MAC address of the FCF that is part of the session.

ENode-MAC

MAC address of the ENode that is part of the session.

VLAN

ID number of the VLAN that contains the session.

FCoE MAC

Source MAC address of the FCoE packets that are originated 

by the ENode as part of the session.

FC-ID

Fiber Channel ID of the virtual port that was created by the 

FCF when the ENode logged into the network.

VLAN

VLAN to which the session belongs.

FC-MAP

FCMAP value used by the FCF.

FCFs

Number of FCFs discovered.

2CSPC4.X8100-SWUM102.book  Page 915  Friday, March 15, 2013  8:56 AM