DELL 8132 ユーザーズマニュアル

DHCP Server and Relay Agent Commands

DHCP Pool Configuration mode

Use the 

 command to display pool configuration 

parameters. The client name should not include the domain name as it is 

specified separately by the 

 command. It 

is not recommended to use embedded blanks in client names.

console(config-dhcp-pool)#client-identifier 01:03:13:18:22:33:11
console(config-dhcp-pool)#host 192.168.21.34 32
console(config-dhcp-pool)#client-name Line_Printer_Hallway

Use the default-router command in DHCP Pool Configuration mode to set 

the IPv4 address of one or more routers for the DHCP client to use. Use the 

no form of the command to remove the default router configuration. Use the 

 command to display pool configuration parameters.

default-router {

ip-address1}[ip address2]

no default-router

No default router is configured.

ip-address1

The IPv4 address of the first default router for the DHCP 

client.

ip-address2

The IPv4 address of the second default router for the DHCP 

client.

2CSPC4.X8100-SWUM102.book  Page 961  Friday, March 15, 2013  8:56 AM