DELL 530b ユーザーズマニュアル
130
Removing and Installing Parts
Installing a PCI/PCI Express Card
1 Follow the procedures in "Before You Begin" on page 105.
2 Remove the computer cover. See "Removing the Computer Cover" on page 107.
2 Remove the computer cover. See "Removing the Computer Cover" on page 107.
3 Remove the screw holding the card retention bracket.
4 Lift the card retention bracket and set it aside in a secure place.
5 If you are installing a new card, remove the filler bracket to create a
4 Lift the card retention bracket and set it aside in a secure place.
5 If you are installing a new card, remove the filler bracket to create a
cardslot opening.
6 If you are replacing a card that is already installed in the computer, remove
the card.
If necessary, disconnect any cables connected to the card.
•
For PCI card, grasp the card by its top corners, and ease it out of its
connector.
connector.
•
For PCI Express card, pull the securing tab, grasp the card by its top
corners, and then ease it out of its connector.
corners, and then ease it out of its connector.
NOTE:
The position of the card shown in the illustration is indicative and may vary
from the original.
1
card retention bracket
2
filler bracket
1
2
book.book Page 130 Monday, October 6, 2008 11:28 AM