DELL D01M ユーザーズマニュアル

Processor Liquid-Cooling Assembly

1 Align the screw holes on the processor liquid-cooling assembly with the 

screw holes on the chassis.

2 Replace the screws that secure the processor liquid-cooling assembly to the 

chassis.

The original thermal grease can be reused if the original processor 

and processor liquid-cooling assembly are reinstalled together. If either the 

processor or the processor liquid-cooling assembly is replaced, use the 

thermal grease provided in the kit to ensure that thermal conductivity is 

achieved.

3 Apply thermal grease between the processor liquid-cooling assembly and 

the processor.

4 Tighten the captive screws that secure the processor liquid-cooling 

assembly to the system board.

5 Connect the system fan cable and the CPU pump cable to the connectors 

on the top lighting-board.

1 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
2 Replace the left side-panel. See "Replacing the Left Side-Panel" on 

3 Follow the steps in "After Working Inside Your Computer" on page 15.

book.book  Page 73  Wednesday, May 16, 2012  2:37 PM