DELL D490 ユーザーズマニュアル

ページ / 124
Quick Reference Guide
29
 
CAUTION: 
The computer stand should be installed at all times to ensure maximum system stability. Failure to 
install the stand could result in the computer tipping over, potentially resulting in bodily injury or damage to the 
computer.
1 Follow the procedures in "Before You Begin" in the User’s Guide.
2 Carefully, with the help of an assistant, tip the computer back at a very slight angle from the ground.
3 Pull the front of the computer stand down towards the ground, to release it from the front of the 
computer.
4 Pull the computer stand toward the front of the computer until the stand is free.
Caring for Your Computer
To help maintain your computer, follow these suggestions:
To avoid losing or corrupting data, never turn off your computer when the hard drive light is on.
Schedule regular virus scans using virus software.
Manage hard drive space by periodically deleting unnecessary files and defragmenting the drive.
Back up files on a regular basis.
Periodically clean your monitor screen, mouse, and keyboard (see your 
User’s Guide for more 
information).
Solving Problems
Troubleshooting Tips
Perform the following checks when you troubleshoot your computer:
If you added or removed a part before the problem started, review the installation procedures and 
ensure that the part is correctly installed.
If a peripheral device does not work, ensure that the device is properly connected.
If an error message appears on the screen, write down the exact message. The message may help 
technical support personnel diagnose and fix the problem(s).
If an error message occurs in a program, see the program’s documentation.
If the recommended action in the troubleshooting section is to see a section in your 
User’s Guide, go to 
support.dell.com
 (on another computer if necessary) to access your User’s Guide.
Resolving Software and Hardware Incompatibilities
If a device is either not detected during the operating system setup or is detected but incorrectly configured, 
you can use the Hardware Troubleshooter to resolve the incompatibility.