DELL P29G ユーザーズマニュアル
Power-Adapter Connector
35
11
Power-Adapter Connector
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13.
2 Remove the power-light board.
2 Remove the power-light board.
3 Remove the battery. See "Removing the Battery" on page 17.
4 Remove the speakers. See "Removing the Speakers" on page 19.
4 Remove the speakers. See "Removing the Speakers" on page 19.
Removing the Power-Adapter Connector
1 Disconnect the mini-card cables from the connectors on the mini-card.
2 Lift the connector latch and pull the pull-tab to disconnect the touchpad
2 Lift the connector latch and pull the pull-tab to disconnect the touchpad
cable from the connector on the system board.
3 Release the mini-card cables from the routing guides.
OM_Book.book Page 35 Tuesday, February 28, 2012 10:16 AM