DELL Area-51 ALX ユーザーズマニュアル

061

061

/

Password Protection

Since AlienRespawn v2.0 has the ability to reformat your hard drive and can be 

accessed without entering Windows, the password-protection functionality has 

been included for your security.

This  feature  is  disabled  by  default,  but  can  be  enabled  through  the  Respawn 

Settings application, described below.

CAUTION:  If  you  forget  your  password,  you  will  not  be  able  to  access 

AlienRespawn v2.0, except by booting to the optional AlienRespawn v2.0 

disc  as  described  in  “To  Use  the  AlienRespawn  v2.0  Disc”  on  page  62. 

Alienware Technical Support will not be able to recover your password. 

If you choose to enable password protection, you do so at your own risk.

To Enable or Change Password Settings

Start

1. 

 

→

 

All Programs

→

 

AlienRespawn v2.0.

Click on the icon labeled 

2. 

Respawn Settings.

The 

3. 

Respawn Settings application will launch.

If you are enabling password protection for the first time, enter the 

• 

default password, “alienware” (case-sensitive), in the appropriate field, 

then click 

Submit.

If you have already defined a password, enter your current password in 

• 

the appropriate field, then click 

Submit.

To change your password, enter the new password in both fields in the 

4. 

Change Password section, then click Apply.
To enable or disable password protection, select the check box labeled 

5. 

Enable Respawn Password Protection, then click Apply.
When password protection is enabled, you will be prompted to enter 

6. 

the password after pressing <F10> to run AlienRespawn v2.0. For more 

information, see “Using AlienRespawn v2.0” on page 59.