DELL 10-ST2E ユーザーズマニュアル

b) battery

3.

Disconnect the volume-board cable from the connector. Lift up and remove the volume-board cable from the 

system board.

4.

Pry the sides of the volume-button board with a flat-head screw driver to loosen it from it's slot on the computer. 

Remove the volume-button board from the computer

Installing the Volume-Button Board

1.

Place the volume-button board in it's slot on the computer.

2.

Route and connect the volume-board cable to the connector.

3.

Install the:
a) battery
b) base cover

4.

Follow the procedures in 

After Working Inside Your Computer

.

19