DELL JYTRG ユーザーズマニュアル

CHAPTER 4: USING YOUR DESKTOP

Configuring the BIOS

System Setup

The System Setup options allow you to:

Change the system configuration information after you add, change, or

•

remove any hardware in your desktop.
Set or change a user-selectable option.

•

View the amount of memory installed.

•

Set the type of hard drive installed.

•

Before you use System Setup, it is recommended that you write down the current

System Setup information for future reference.

CAUTION: Do not change the settings in System Setup unless you are

an expert computer user. Certain changes can cause your computer to

work incorrectly.

Entering System Setup

Turn on (or restart) your desktop.

NOTE: Keyboard failure may result when a key on the keyboard is held down

for extended periods of time. To avoid possible keyboard failure, press and

release <F2> in even intervals until the System Setup screen appears.

While the desktop is booting, press <F2> immediately before the operating

system logo appears to access the

BIOS Setup Utility.

NOTE: If an error occurs during POST (Power On Self Test), press <F2>

when the prompt appears to enter the

BIOS Setup Utility.

NOTE: If you wait too long and the operating system logo appears, continue

to wait until you see the Microsoft

Windows

desktop, then shut down

your desktop and try again.

System Setup Screens

The

BIOS Setup Utility displays current or changeable configuration information

for your desktop.

Key functions appear at the bottom of the

BIOS Setup Utility screen and lists

keys and their functions within the active field.