DELL C1100 ユーザーズマニュアル

ページ / 140
Troubleshooting Your System
109
Troubleshooting a Hard Drive
 
CAUTION: 
Many repairs may only be done by a certified service technician. 
You should only perform troubleshooting and simple repairs as authorized in 
your product documentation, or as directed by the online or telephone service and 
support team. Damage due to servicing that is not authorized by Dell is not 
covered by your warranty. Read and follow the safety instructions that came 
with the product.
 
CAUTION: 
This troubleshooting procedure can destroy data stored on the 
hard drive. Before you proceed, back up all files on the hard drive. 
If your system has a RAID controller and your hard drives are configured in 
a RAID array, perform the following steps:
a
Restart the system and enter the host adapter configuration utility 
program by pressing <Ctrl><R> for a PERC controller or 
<Ctrl><C> for a SAS controller.
See the documentation supplied with the host adapter for information 
about the configuration utility.
b
Ensure that the hard drive(s) have been configured correctly for the 
RAID array. 
c
Take the hard drive offline and reseat the drive. See "Removing a 
d
Exit the configuration utility and allow the system to boot to the 
operating system.
Ensure that the required device drivers for your controller card are installed 
and are configured correctly. See the operating system documentation for 
more information.
Restart the system, enter the System Setup program, and verify that the 
controller is enabled and the drives appear in the System Setup program. 
book.book  Page 109  Tuesday, February 26, 2013  11:33 AM