IBM SBC-659P ユーザーズマニュアル

•  CPU: FC-370 Pentium III (Coppermine), Celeron, Tualatin and compatible
    CPUs (With system bus frequencies of 66/100/133MHz).

•  CPU socket: 370 pins Socket

•  BIOS: Award 2 MB Flash BIOS

•  Chipset: Intel 815E

•  I/O chipset: ITE 8712F.

•  Memory : Onboard one 144 pins SODIMM socket supports up to
   256Mbytes SDRAM (PC-100/133 SDRAM supported).

•  Enhanced IDE: One IDE channel.  Support Ultra DMA/ 100
  mode with data transfer rate of 100MB/sec.

•  FDD interface: Supports two floppy disk drives, 5.25" (360KB and
   1.2MB) and/or 3.5" (720KB, 1.44MB, and 2.88MB).

•  Parallel port: One bi-directional parallel ports.  Supports SPP, ECP, and
    EPP modes.

•  Serial port: Two RS-232 serial ports can be configured as COM1, COM2,
   or disabled individually and of which one can be configured as  RS-
   232/422/485 (COM2).  (16C550 equivalent).

•  IRDA interface: Supports SIR and CIR

•  KB/Mouse connector : 6-pin mini-DIN connector supports PC/AT
   keyboard and PS/2 mouse and wake on KBD function.

•  USB connectors:  Two 10-pin onboard connectors supports four USB
ports.

•  Battery: Lithium battery for data retention

•  Watchdog timer: Can generate a system reset, IRQ15, or NMI.
   Software selectable time-out interval (1 sec. ~ 255 sec, 1 sec./step)

•  DMA:  7 DMA channels (8237 equivalent)

•  Interrupt:  15 interrupt levels (8259 equivalent)