IBM 2140 ユーザーズマニュアル
![IBM](https://files.manualsbrain.com/attachments/f70d337d03c66895b7a6fbe0e6de3554f47d7dd3/common/fit/150/50/fb4e568062ca4d0154259807170f4c71f2c7aafa861a4d9a0eb3af958af4/brand_logo.png)
Command Line Options
To enter PC-Doctor commands:
Note: Before beginning, ensure that Suspend Timer is disabled in the
Setup Utility.
Setup Utility.
1. Install the Diagnostics and Utilities CD in the CD/DVD-ROM drive.
2. Power-off, then power-on the system unit.
3. Do not press F1 during POST.
4. If any POST errors appear after POST, make a note of the errors and
2. Power-off, then power-on the system unit.
3. Do not press F1 during POST.
4. If any POST errors appear after POST, make a note of the errors and
press the Esc key.
5. When the “Aptiva Diagnostics and Utilities Menu” screen is displayed,
type: zero for a DOS prompt, then change the DOS prompt to G: or the
drive letter designated for the CD/DVD-ROM.
drive letter designated for the CD/DVD-ROM.
6. Type CD\PCDR to get the the PCDR directory.
7. Type PCDR/XX (where /XX represents one of the following from the list
7. Type PCDR/XX (where /XX represents one of the following from the list
below) then press Enter.
Command
Action
/AN
Enables automatic testlog numbering. A sequential number
will be added to testlogs automatically. This number is stored
in the file PCDR.NUM, which can be edited using the text
editor. PC-Doctor will automatically add a testlog number if the
file PCDR.NUM exists. To disable this feature, you must
delete the PCDR.NUM file.
will be added to testlogs automatically. This number is stored
in the file PCDR.NUM, which can be edited using the text
editor. PC-Doctor will automatically add a testlog number if the
file PCDR.NUM exists. To disable this feature, you must
delete the PCDR.NUM file.
/BA:xx
Start batch mode testing of overlay number "xx". The overlay
number must be in the range of 1- 10. For this switch to be
useful, it should be combined with the "/PR:nnnn" switch and
possibly also the /EO and /HE switches. At the end of batch
mode testing, PC-Doctor returns with an ERRORLEVEL that is
set to 0 for no errors, 1 if any tests failed, or 2 if testing was
aborted.
number must be in the range of 1- 10. For this switch to be
useful, it should be combined with the "/PR:nnnn" switch and
possibly also the /EO and /HE switches. At the end of batch
mode testing, PC-Doctor returns with an ERRORLEVEL that is
set to 0 for no errors, 1 if any tests failed, or 2 if testing was
aborted.
/DJ
Direct Joystick I/O. This will force PC-Doctor to read joystick
status and position directly from the hardware.
status and position directly from the hardware.
/EO
Log error only. If selected, PC-Doctor will only log tests that
produce a FAILED result. You can use this switch to bypass
PASSED and N/A test results in order to produce shorter test
logs.
produce a FAILED result. You can use this switch to bypass
PASSED and N/A test results in order to produce shorter test
logs.
/HE
Enables halt-on-errors mode. If PC-Doctor encounters a failed
diagnostic test, it asks the user if it should continue or abort
testing.
diagnostic test, it asks the user if it should continue or abort
testing.
Diagnostic Aids
3-9