JVC LYT1282-001A ユーザーズマニュアル
36
EN
Master Page: Left-Heading0
Appendix
VIDEO CONFERENCE OVER THE INTERNET
You can use Windows
®
NetMeeting
®
to conduct video conferences over the Internet, using a camcorder.
NOTE:
There are differences in the following procedures whether your camcorder is equipped with D.S.C. (Digital
Still Camera) features or not.
There are differences in the following procedures whether your camcorder is equipped with D.S.C. (Digital
Still Camera) features or not.
Preparation
1
1
Confirm that Windows
®
NetMeeting
®
3.0 or later and MSN Messenger Service are installed.
● You can download the latest version of Windows
®
NetMeeting
®
or MSN Messenger Service from
Microsoft’s web site:
http://www.microsoft.com/
2
Install [USB Video Streaming driver].
● Refer to “Software Installation (Windows
®
)” in “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE”.
● If the installation of [USB Video Streaming driver] has already been completed, go to step 3 or 4.
3
Make sure that no cassette is in the camcorder. (Only for D.S.C. non-equipped models)
4
Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows
®
)” in “SOFTWARE INSTALLATION AND USB CONNECTION
GUIDE”.
5
Set the camcorder’s VIDEO/MEMORY Switch to “MEMORY”. (Only for D.S.C. equipped
models)
models)
6
Set the camcorder’s Power Switch to “A” or “M” while pressing down the Lock Button
located on the switch.
located on the switch.
The camcorder is now on.
“
“
” appears on the camcorder’s LCD monitor.
● If “
” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows
®
)” in “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE”.
NOTE:
The procedure is different when reading or writing a memory card. (Only for D.S.C. equipped models)
The procedure is different when reading or writing a memory card. (Only for D.S.C. equipped models)
7
Click [Start], go to [Settings] – [Control Panel], and then double click the [Multimedia] icon.
8
Select the [Audio] tab and click [JVC PIX-MCV Audio Capture] or [JVC PIX-MC10 Audio
Capture] in the [Preferred device] box.
Capture] in the [Preferred device] box.
9
Start NetMeeting
®
, and set up the program as instructed on the screen.
● An environment that provides for connection to the Internet and an e-mail address are also required.
● Select [JVC PIX-MCV Audio Capture] or [JVC PIX-MC10 Audio Capture] as a recording device in the
[Audio adjustment] wizard.
10
In the [Conference] menu, click [Directory].
The [Find Other Party] dialog box appears.
11
Register with HotMail as instructed on the screen.
12
Set up MSN Messenger as instructed on the screen.
● If setup was completed previously, the MSN Messenger Service logon window appears.
13
Exit NetMeeting
®
and MSN Messenger Service.
Using Windows
®
NetMeeting
®
(Windows
®
Only)
CONTINUED ON NEXT PAGE
M4D3+DSC_Soft.book Page 36 Tuesday, December 16, 2003 2:08 PM