HP (Hewlett-Packard) D8D17UT#ABA ユーザーズマニュアル
Configuring system BIOS
To set up a RAID configuration, the emulation mode must be set to RAID+AHCI in the Computer Setup
(F10) Utility. This is the default setting. If the mode has been changed, follow these steps to change it
back.
1.
During startup, press
F10
to enter the Computer Setup (F10) Utility.
2.
Using the arrow keys, navigate to:
a. Desired language, then press
Enter.
b. Storage > Storage Options, then press
Enter.
c.
SATA Emulation > RAID+AHCI, then press
F10
to accept the new settings.
3.
Navigate to:
a. Advanced > Power-On Options, then press
Enter.
b. POST Messages > Enable, then press
F10
to accept the new settings.
4.
Navigate to:
a. Advanced > Device Options, then press
Enter.
b. SATA RAID Option ROM Download, then press
Enter.
c.
Enable, then press
F10
to accept the new settings.
5.
Navigate to File > Save Changes and Exit, then press
Enter
.
6.
Press
Enter
to accept the changes when prompted.
Configuring Intel SATA RAID
169