HP (Hewlett-Packard) S7300CL ユーザーズマニュアル

    Upgrading and Servicing Guide 

 

 

4 Release the drive from the chassis by following the 

method appropriate for your PC model. 

• 

To release a drive from the chassis of the S0000 
series, lift the release tab (1) on the latch drive 
bracket of the drive you want to remove, and 
then slide the drive from its drive bay (2). (The 
latch drive bracket secures the drives in their 
respective positions in the chassis.) 

   

 

• 

To release an optical drive or diskette drive from 
the chassis of the 8000 series, slide the drive 
lock mechanism (1) to unlock the drive in the 
drive bay and pull the drive out of the drive 
bay (2). 

   

 

• 

To release a hard disk drive from the chassis of 
the 8000 series, slide the drive lock mechanism 
(1) to unlock the drive in the drive bay, remove 
the metal drive shield (2) by pressing and lifting 
the two tabs on one side of the shield, and then 
pull the drive out of the drive bay (3). 

   

 

5 For both the S0000 and 8000 series, if you are 

replacing the old drive with a new drive, remove 
the four screws (4) (two on each side) from the 
old drive. You need these screws to install the new 
drive.