HP (Hewlett-Packard) D3J88UT#ABA ユーザーズマニュアル

This chapter describes how to configure password security and to reset CMOS, and includes these

topics:

●

●

●

The Computer Setup (F10) Utility enables you to create setup and power-on passwords.

There are three possibilities for setting passwords:

●

Define a setup password only. You will need the password to enter the Computer Setup (F10)

Utility, but do not need a password to start the workstation.

●

Define a power-on password only. This password lets you start the workstation or enter the setup

utility.

●

Define both. In this case, the setup password lets you start the workstation and enter the setup

utility. The power-on password starts the workstation but does not let you enter the setup utility,

After you create both passwords, you can use the setup password in place of the power-on password

as an override to log into the computer (a useful feature for a network administrator).

You can only clear the passwords with the password jumper. Clearing CMOS does not clear

the passwords.

Before pressing the Clear CMOS button, back up your computer CMOS settings.

Pressing the Clear CMOS button resets CMOS values to factory defaults and erases customized

information, including asset numbers and special settings.

To back up the CMOS settings, run the Computer Setup (F10) Utility and select Save to Diskette

from the File menu.

158

Chapter 5   Configuring password security and resetting CMOS